Tech Specs

Fabricating Tech Specification (office)
Sl. No.ComponentsDescriptions
1Bottom Frame100 x50 mm formed C channel..
2Stiffener Bottom
80x40mm C channel & 25×50 mm square pipes.
3Top Frame
Frame made of 50x50mm square pipes.
4Stiffener Top
50×50 mm, 25×50 mm &25 x 25 mm Square pipes.
5Side Wall Stiffeners
Corner post shall be of 50×50 mm, 25×50 mm pipe & wall thickness of 50 mm. ISI Marked
6Paneling Outside
Specially corrugated 1.2mm thick MS Sheets on MS frame.
7Internal Wall Paneling
8mm thick mdf board & all vertically and horizontal corners will be neatly and smoothly Finished with MS section & Angles
8Roof Outside
1.2mm thick MS sheet properly sloped & water tight protect from Anti rust,
9False Ceiling
8mm mdf board & all vertically and horizontal corners will be neatly and smoothly Finished with MS Sections & Langles.
10Bottom Flooring
On the bottom frame 18 mm thick V-Board i.e. Cemented bonded fiber sheets shall be fixed by means of self-taping screw &1.5mm thick PVC vinyl Carpet shall be fixed on the panel. (100% water, termite & dimensional proof with vinyl Carpet)
11Aluminum Sliding Windows
Double shutter sliding aluminum powder coated windows with 4mm thick glass for all windows, safety grills from outside &canopy on the top of windows
12Main Door
The door shall be of external opening type made out of the same material as wall panels& canopy above the door. Frame work by tubular pipe of 30 x 30 & the door interior shall be finished with same material matching with that of the Cabin interior with thermacol insulations. Door with std hardware r with thermac locks & handles.
13Insulation
25 mm thick Glass wool density of 32 kg/m3 with insulation for top &12mm foam on side walls, To Avoid Heat.
14Wiring
All wiring shall be concealed and shall be PVC insulated copper wires of ISI quality, suitable for 240 volt, 50 HZ single phase AC power supply. 2.5 mm thick cable for lighting, 5amp switches with 3pin Sockets, bulk head light above the door, 4mm thick cable for main electrical supply & with MCB protection Split Air Conditioner point along with separate MCB. ISI Marked
15Outside Painting
All components are painted with 1 Zinc Chromate coat of primer & 2 coats of corrosion free paint i.e. synthetic epoxy paint.